Aspire Feedlink Revvo Kit

Aspire Feedlink Revvo Kit Yes, it’s still the same out of this world Revvo tank with the awesome, innovative ARC coil but now coupled with a squonk mod, the Feedlink. The Feedlink is a single 18650 battery (not included) bypass..

  • Ex Tax: $54.99
  • Product Code: M00001678
  • Availability: In Stock
$54.99

Aspire Feedlink Revvo Kit

Yes, it’s still the same out of this world Revvo tank with the awesome, innovative ARC coil but now coupled with a squonk mod, the Feedlink. The Feedlink is a single 18650 battery (not included) bypass firing mod with all the quality and safety features you have come to expect from Aspire. It’s almost pistol grip feel makes it very ergonomic in the hand and easy to operate the squonk bottle and fire button with just one hand, an absolute joy to hold and use. In addition to the Feedlink mod there is the newly designed bottom feeding Revvo boost Tank. Aspire had already broken the mold for a tank with its new, flat Radial coil, and now it’s even easier to fill with a bottom feeding squonk pin! The tank itself comes in a TPD compliant 2ml version, who needs any more capacity when just a squeeze of the squonk bottle will top up your tank, you don’t even have to put it down.

The ‘pistol grip’ mod including the tank is ergonomically styled and fits snugly in the hand easy for left or right hand use. The tank is simplicity itself to use, it has an ultra convenient bottom feed squonk pin system where you don’t even have to open, unscrew, lift or otherwise adjust for filling.

The tank has the same awesome adjustable airflow with three large air inlets and comes in a TPD compliant 2ml version with no need for a larger tank due to the squonk style bottom feed filling system, just squeeze the squonk bottle and it’s filled and ready to go again.

This is simplicity itself, just an anti-clockwise turn of the bottle retaining screw with release the bottle carrier and the bottle. Remove the bottle from the carrier, unscrew the metal top-cap and feeder tube and fill with your favorite e-liquid. Replace the top-cap/feeder tube, reinsert into the carrier and replace into the mod, remembering to replace and tighten the bottle retaining screw.

Similar to the squonk bottle removal/refilling, just unscrew the battery cap in the base of the mod, insert a fresh 18650 battery, positive post upper most towards the top of the mod, replace the screw-in battery cap firmly and the mod is ready to use.

To fill or top up the tank, gently squeeze the squonk bottle until you can see your vape juice rising into the tank, squeeze again to fill the tank to your requirements but don’t try to overfill, remember you can top up easily with just another gentle squeeze or two. Once filled (just as with the original Revvo tank), if it’s a new coil or the coil has become dry for any reason, invert tank to saturate the coil before vaping.

Check out the new Aspire Tigon Kit

Aspire Feedlink Revvo Starter Kit Features and Specifications:

  • Size: 124mm x 48mm x 30mm
  • Battery: 1x 18650 cell (NOT included)
  • Tank capacity: 2.0ml
  • Bottle capacity: 7.0ml
  • Output voltage: 3-4.2V
  • Tank diameter: 24mm
  • Coil: ARC(0.1-0.14ohm) Coil
  • Screen: 0.86-inch OLED
  • Thread: 510 thread

Aspire Feedlink Revvo Starter Kits Include:

  • 1x Feedlink mod
  • 1x Revvo Boost tank
  • 2x ARC Coils (0.10-0.14ohm)
  • 2x Glass tube
  • 11x O-rings
  • 1x Warranty Card
  • User Manual

Battery Included?

No - 1 x 20700 battery sold separately

Max Power

80 Watts

Tank Capacity

7 ml

Dimensions

87 x 48 x 30mm

Write a review

Note: HTML is not translated!
    Bad           Good